Home > Rook- en WarmteAfvoer > Sloten > FV1/FV3/FV4 24V 600N

FV1/FV3/FV4 24V 600N

Referentienummer:
Single right hand L420 FV1 R (1x) : 515103
Single right hand L420 FV3 R (1x) : 515102
Single right hand L420 FV4 R (1x) : 515129 		 Double right hand L1200 FV1 R (2x) : 515111
Double right hand L1200 FV3 R (2x) : 515110
Double right hand L1200 FV4 R (2x) : 515131 
Single left hand L420 FV1 L (1x) : 515106
Single left hand L420 FV3 L (1x) : 515105
Single left hand L420 FV4 L (1x) 1 515130 		 Double right hand L2000 FV1 R (2x) : 515113
Double right hand L2000 FV3 R (2x) : 515112
Double right hand L2000 FV4 R (2x) : 515132 
Triple right hand L2000 FV1 R (3x) : 515116
Triple right hand L2000 FV3 R (3x) : 515114
Triple right hand L2000 FV4 R (3x) : 515136

 

 

 

 

Noteer de gewenste referenties

Vraag prijsofferte
##

AUMÜLLER FV locking drives have a drive force of 600 N. The attractive, slim aluminium housings lie flat against the profile. Window locking drives are used for the reliable locking an unlocking of all common window types in combination with various window drives.

FV – Technical Data

Rated voltage 24V DC / 0,6 A
Cut-off switch FV1 – w/o internal cut-off switch and w/o sequence control, for use in SHEV hardware systems with USKM module
FV3 – internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A)
FV4 – internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12
Versions 1, 2 or 3 locking points right, left
Pushing/Pulling force 600 N
Running time ~ 5 sec
Housing (W x D x L) 35 x 35 mm, length depinding on version
Locking mechanism Surface mounted locking angles
Protection rating IP 32
Space required on frame min. 35 mm
Certification NSHEV compliant with EN 12101-2

FV1 – Version

Cut-off switch
FV1 – w/o internal cut-off switch and w/o sequence control, for use in SHEV hardware systems with USKM module
FV3 – Internal load dependend cut-off switch (S3) and sequence control for SHEV hardware sets (solo) with drives PL6 S1 / PL10 S1 (IA = 0,8 A)
FV4 – Internal load dependend cut-off switch (S3) and sequence control for drive version S3 and S12

Versions
1 Locking point / L = 420 mm
2 Locking points / L = 1200 oder 2000 mm
3 Locking points / L = 2000 mm
R = Right version
L = Left version

FV1 – Options

Aluminium housing finish according to RAL
Extension of lead length
Mounting plate for installation on the window frame profile of outward opening windows
or on the casement profile of inward opening windows
Slim locking bracket of 18mm for small mounting space on the window frame profile
Base plate for compensation of profile overlap
FV4 – S3: programmable sequence control for drives (S3/S12 SW V2)
Customised followers and strokes on request

FV – Highlights

  • Sequence control with several drives
  • Housing of natural, anodised aluminium, other RAL colours upon request
  • Suitable for surface mounting
  • Robust, corrosion-resistant design
  • Easy to install due to concealed bores under bevelled end caps and therefore invisible screws
  • Cable connection terminals below the end cap
  • Small locking bracket for 18 mm mounting space on window frame profil

FV – Mounting

AUMÜLLER FV drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in façades as well as on roof windows.
The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).
The locking is provided by a locking bracket. All common types of windows can be reliably locked and unlocked with the available accessories, irrespective of the opening direction.
Users of locking drives consist primarily of window and façade constructors.

DOWNLOADEN

Technical information
Catalogues
Certificates