Home > Rook- en WarmteAfvoer > Kettingmotor > KS15 S12 24V DC 1500N

KS15 S12 24V DC 1500N

Referentienummer:

KS15 800 S12 24V : 525380
KS15 1000 S12 24V : 525400

 

Noteer de gewenste referenties

Vraag prijsofferte
##

KS15 – Technical Data

Nominaal Voltage 24V DC
Nominale stroom 3,75 A
Afschakeling stroom 5 A
Nominaal vermogen 90 W
Arbeidscyclus 5 cycli (ED 30% – ON: 3 min./OFF: 7 min.)
Beschermingsgraad Elektrische inrichting IP 20
Gebruikstemperatuur -5°C … +60°C
Maximale trekkracht 600 N
Duwkracht 1.500 N
Uittrekkracht 300N tot 1.500N
Ketting Gegalvaniseerd staal
Kabel Plug-in aan beide zijden (links & rechts)

Halogeenvrije kabel grijs – 5 x 0,5 mm2, ̴ 3 m
Koerslengte (s)

Lengte motor (L)

 250 – 1000 mm (± 5%)

 
Snelheid Max. 17mm/s
Programmeerbare functies Koerslengte – Kracht – Snelheid

Soft-start – soft-close – soft-stop
Programmeerbare feedback-limiet “dicht” (max 24V, 500 mA)
Parallel schakeling t.e.m. 8 motoren
RWA Ja
Inbouw Neen
Eindeloop Elektronische eindeloop
Behuizing Geanodiseerd aluminium
Synchronisatie Via M-COM voor automatische synchronisatie

KS15 – Options

  • Aluminium housing anodized finish according to RAL
  • Extension of lead length
  • Electronic stroke reduction
  • Programmable special functions
  • Programmable feedback limit position „OPEN“ (max. 24V, 500 mA)
  • M-COM for automatic synchronised run of multi drive systems and automatic sequence control with locking drives (S3 / S12)
  • Further options on request

KS15 – Highlights

  • Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation
  • Suitable for surface mounted drives
  • Robust, corrosion-resistant design
  • Universal brackets and casement brackets for all common profile systems
  • Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
  • Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height
  • The connection cable can be run out of the housing on either side
  • Programmable parameters of intelligent S12 electronic cut-off switch:
    •  Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
    •  Soft start and soft stop at the end of stroke control
    •  Stroke length, closing force, speed
    •  Rebate control
  • M-COM for automatic synchronised run of multi drive systems and automatic sequence control with locking drives (S3 / S12)

KS15 – Mounting

Due to their slim design, chain drives from AUMÜLLER lie flat on the window profiles. They can be used in SHEV systems and for natural ventilation via automated windows, mainly in façades.

The window openers are installed either installed surface mounted or integrated into the profile. The preferred installation locations are window frames (main closing edge or side closing edge).

It is also possible to mount chain drives to side-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows.

Because of a microprocessor-controlled load dependend cut-off switch, synchronous operation with multi drive applications or sequential controls with locking drives or object-specific special solutions are possible without additional devices.

DOWNLOADEN

Technical information
Catalogi
Certificates